Annoyed by constant Wi-Fi drops? Here’s the fix you need

Dropping out of a meeting, watching a stream buffer right at the climax, or seeing a download freeze is downright infuriating. If your Wi-Fi is smooth one moment and crawling the next, the issue could lie with your connection or your device. Here’s how to put an end to those constant disconnects. Rule out issues with your internet connection When Wi-Fi keeps dropping, your first thought might be that the problem is with your device-but often, the real culprit is your internet connection. Before you start troubleshooting your device, ensure the issue isn’t coming from your ISP. It’s easy to check: if other devices on the same network experience the same drops, the problem could be with your internet. If several devices are having the same issue, begin with simple steps: restart your modem or router, look for any router warning lights, and check whether your ISP is experiencing outages. Too many devices on the network can also consume bandwidth, so disconnect unnecessary devices to see if that helps. You can also run speed tests at different times to identify instability. If the problem persists across devices, report it to your ISP. But if only your Windows laptop experiences the drops, move on to the next set of device-specific fixes. Adjust your power management settings If your internet connection isn’t the issue, the next thing to check is whether your device is automatically turning off the Wi-Fi adapter to save power-something that often happens when the battery is low or power-saving mode is enabled. To prevent this, you should turn off the setting that allows Windows to power down the adapter. Right-click the Start button and open “Device Manager.” Expand “Network Adapters,” locate your Wi-Fi adapter, right-click it, and select “Properties.” Go to the “Power Management” tab and uncheck “Allow the computer to turn off this device to save power.” Click “OK” to save your changes. If power management was causing the problem, this should resolve it. Remove other saved networks and change priority Do you have multiple Wi-Fi networks nearby? If your PC is set to automatically connect to networks in range, it might switch from your primary connection to a weaker or unstable one, causing drops. It can also disconnect while searching for a stronger signal from other saved networks. To prevent this, remove or deprioritize other saved networks. Right-click the Start button and open “Settings.” Navigate to “Network & Internet” on the left, then go to Wi-Fi > Manage Known Networks. Open your main network and make sure “Connect automatically when in range” is checked. To stop your PC from switching to other networks, uncheck this option for the other saved networks or choose to forget them completely. Switch to a different Wi-Fi band or channel Interference from nearby networks or devices can also cause frequent Wi-Fi drops. Most modern routers are dual-band, offering both 2. 4 GHz and 5 GHz networks. The 2. 4 GHz band provides longer range and better wall penetration, but at slower speeds. The 5 GHz band offers faster performance with less interference, though over a shorter distance. Choosing the band that best fits your environment can often improve stability. To switch bands, log in to your router’s dashboard (usually through an address like 192. 168. 1. 1), open the Wi-Fi or Wireless Settings section, and check which band your device is currently using. Switch to the more suitable one if necessary. You can also manually change the Wi-Fi channel-for example, on the 2. 4 GHz band, try channels 1, 6, or 11, as they are non-overlapping and usually less crowded. Do you use a VPN or third-party security/firewall software on your computer? VPNs can reroute traffic and sometimes interfere with network stability, while security software might block certain connections or create conflicts that lead to frequent disconnects. If you use any of these, they could cause Wi-Fi drops. To test this, temporarily disable your VPN and see if the connection stabilizes. Next, briefly turn off firewalls or security software, then check again. If your Wi-Fi continues to drop even after trying other fixes, outdated drivers may be the culprit. Updating your Wi-Fi drivers often resolves persistent connectivity problems. To do this, right-click the Start button and open “Device Manager.” Expand “Network Adapters,” right-click your Wi-Fi adapter, and select “Update Driver,” then follow the on-screen instructions. Resetting the network adapter can also help fix the issue. To do this, right-click the Start button and open “Settings.” Then, go to Network & Internet > Advanced Network Settings, and click Network Reset > Reset Now at the bottom. This will remove and reinstall all network adapters, restoring their settings to default. Afterward, restart your PC and reconnect to your Wi-Fi. Reset the TCP/IP stack and flush your DNS Sometimes Wi-Fi drops are caused by corrupted network settings or cached DNS entries on your PC. Resetting TCP/IP and flushing the DNS can often resolve these issues. To do this, type Command Prompt in the search bar, right-click it, and select “Run as Administrator.” Then, enter the following commands one by one, pressing Enter after each: netsh int ip reset resets your TCP/IP stack to default. ipconfig /release releases your current IP address. ipconfig /renew requests a new IP address from your router. ipconfig /flushdns clears the DNS cache. After running these commands, restart your computer and reconnect to your Wi-Fi. If outdated DNS entries or IP conflicts were causing the drops, this should fix the problem. Following the steps above will help you identify the root cause of the issue. Once resolved, your Wi-Fi should remain stable, allowing you to work, stream, and browse without interruptions.
https://www.howtogeek.com/fix-constant-wifi-drops/