The U. S. government will speed up efforts to review the immigration status of “every single person added to this country over the last four years,” Stephen Miller, a senior adviser to Donald Trump, said on Wednesday. “What you heard from President Trump, the breaking news here tonight, is that his government is going to accelerate efforts to review every single person added to this country over the last four years,” he told Fox News, estimatng that would amount to 20 million migrants. The undocumented immigrant population in the United States reached 14 million in 2023, according to nonpartisan think tank Pew Research Center. President Donald Trump said earlier on Wednesday that individuals who arrived in the U. S. from Afghanistan during the Biden administration should have their status “reexamined.” Trump spoke after it emerged two West Virginia National Guard members deployed in Washington, D. C., had been shot and injured, with an Afghan national named as the suspect. “We must now reexamine every single alien who has entered our country from Afghanistan under Biden and we must take all necessary measures to ensure the removal of any alien from the country who does not belong here, or add benefit to our country. If they can’t love our country, we don’t want them,” President Trump said. Rahmanullah Lakanwal entered the U. S. in 2021 under Operation Allies Welcome, the Department of Homeland Security (DHS) said. Lakamal was granted asylum earlier this year under the Trump administration, according to reports from several outlets. Miller added: “Now if you’re an illegal you’re out automatically, but everybody else who was brought here refugee-, asylum- status whatever status, as he said, if you’re not someone who loves this country if you’re not any benefit to this country wer’e going to send you out of this country.” Thousands of Afghans entered the U. S. after the U. S. withdrawal and the Taliban regaining control in 2021. Many had worked with American forces as interpreters and support staff and were considered at risk of persecution under the new Taliban government. This is a developing story; updates to follow.
https://www.newsweek.com/millions-migrants-right-to-remain-united-states-reviewed-white-house-11118458
Tag: automatically
Convicted child molester gets 25 years to life for attacking wife in La Palma
A 65-year-old convicted child molester and three-striker who spent decades behind bars has been sentenced to 25 years to life in prison for seriously injuring his wife. An Orange County Superior Court jury earlier this year found Gary Blane Bentley guilty of two felony counts of corporal battery on a spouse resulting in a traumatic condition, according to a statement by the Orange County District Attorney’s Office. It was the latest in a long string of convictions for acts of violence that included slitting a girlfriend’s throat and stabbing a 5-year-old girl’s eye, the statement added. On June 24, 2022, Bentley punched his wife repeatedly in the face and then dragged her back into the bedroom of their La Palma apartment before his wife was able to break free, prosecutors said. Covered in blood and nearly nude, the woman escaped by banging on her neighbor’s door and begging for help, according to the statement. La Palma police officers tracked Bentley to Long Beach and took him into custody. Prosecutors say the attack was a culmination of years of unreported domestic violence against the woman. In 1982, Bentley was convicted of attempting to murder his then-girlfriend and maiming her 5-year-old daughter, who was left permanently blind in one eye. He was sentenced to 11 years in prison. In 1990, he was convicted of continuously sexually assaulting a child under age 14 in Los Angeles County and ordered to spend 17 years behind bars. He was convicted of another sex-related offense in 2007, but his 25 years-to-life sentence for that crime was overturned several years later. In 2011, Bentley was convicted of indecent exposure in Los Angeles County and received a six-year prison sentence. He was still on probation for that crime when he attacked his wife. A third strike means he automatically received a far heavier sentence. “Gary Bentley and the reign of terror he has inflicted on women and children throughout his entire life is exactly why California’s Three Strikes Law exists,” Orange County District Attorney Todd Spitzer said in a statement. ”There are certain individuals who have inflicted so much pain and violence on other human beings that they cannot continue to live among civilized society.“For decades, Gary Bentley has committed crime after crime with callousness, without remorse, and there has not been a single period of time when he has lived a law-abiding life,” Spitzer added. “Society is safer as a result of the incredible advocacy of the La Palma Police Department and Deputy District Attorney Sharlene Mandella to ensure justice for the victim in this case and to prevent future women and children from becoming victimized.”.
https://www.ocregister.com/2025/11/25/convicted-child-molester-gets-25-years-to-life-for-attacking-wife-in-la-palma/
Annoyed by constant Wi-Fi drops? Here’s the fix you need
Dropping out of a meeting, watching a stream buffer right at the climax, or seeing a download freeze is downright infuriating. If your Wi-Fi is smooth one moment and crawling the next, the issue could lie with your connection or your device. Here’s how to put an end to those constant disconnects. Rule out issues with your internet connection When Wi-Fi keeps dropping, your first thought might be that the problem is with your device-but often, the real culprit is your internet connection. Before you start troubleshooting your device, ensure the issue isn’t coming from your ISP. It’s easy to check: if other devices on the same network experience the same drops, the problem could be with your internet. If several devices are having the same issue, begin with simple steps: restart your modem or router, look for any router warning lights, and check whether your ISP is experiencing outages. Too many devices on the network can also consume bandwidth, so disconnect unnecessary devices to see if that helps. You can also run speed tests at different times to identify instability. If the problem persists across devices, report it to your ISP. But if only your Windows laptop experiences the drops, move on to the next set of device-specific fixes. Adjust your power management settings If your internet connection isn’t the issue, the next thing to check is whether your device is automatically turning off the Wi-Fi adapter to save power-something that often happens when the battery is low or power-saving mode is enabled. To prevent this, you should turn off the setting that allows Windows to power down the adapter. Right-click the Start button and open “Device Manager.” Expand “Network Adapters,” locate your Wi-Fi adapter, right-click it, and select “Properties.” Go to the “Power Management” tab and uncheck “Allow the computer to turn off this device to save power.” Click “OK” to save your changes. If power management was causing the problem, this should resolve it. Remove other saved networks and change priority Do you have multiple Wi-Fi networks nearby? If your PC is set to automatically connect to networks in range, it might switch from your primary connection to a weaker or unstable one, causing drops. It can also disconnect while searching for a stronger signal from other saved networks. To prevent this, remove or deprioritize other saved networks. Right-click the Start button and open “Settings.” Navigate to “Network & Internet” on the left, then go to Wi-Fi > Manage Known Networks. Open your main network and make sure “Connect automatically when in range” is checked. To stop your PC from switching to other networks, uncheck this option for the other saved networks or choose to forget them completely. Switch to a different Wi-Fi band or channel Interference from nearby networks or devices can also cause frequent Wi-Fi drops. Most modern routers are dual-band, offering both 2. 4 GHz and 5 GHz networks. The 2. 4 GHz band provides longer range and better wall penetration, but at slower speeds. The 5 GHz band offers faster performance with less interference, though over a shorter distance. Choosing the band that best fits your environment can often improve stability. To switch bands, log in to your router’s dashboard (usually through an address like 192. 168. 1. 1), open the Wi-Fi or Wireless Settings section, and check which band your device is currently using. Switch to the more suitable one if necessary. You can also manually change the Wi-Fi channel-for example, on the 2. 4 GHz band, try channels 1, 6, or 11, as they are non-overlapping and usually less crowded. Do you use a VPN or third-party security/firewall software on your computer? VPNs can reroute traffic and sometimes interfere with network stability, while security software might block certain connections or create conflicts that lead to frequent disconnects. If you use any of these, they could cause Wi-Fi drops. To test this, temporarily disable your VPN and see if the connection stabilizes. Next, briefly turn off firewalls or security software, then check again. If your Wi-Fi continues to drop even after trying other fixes, outdated drivers may be the culprit. Updating your Wi-Fi drivers often resolves persistent connectivity problems. To do this, right-click the Start button and open “Device Manager.” Expand “Network Adapters,” right-click your Wi-Fi adapter, and select “Update Driver,” then follow the on-screen instructions. Resetting the network adapter can also help fix the issue. To do this, right-click the Start button and open “Settings.” Then, go to Network & Internet > Advanced Network Settings, and click Network Reset > Reset Now at the bottom. This will remove and reinstall all network adapters, restoring their settings to default. Afterward, restart your PC and reconnect to your Wi-Fi. Reset the TCP/IP stack and flush your DNS Sometimes Wi-Fi drops are caused by corrupted network settings or cached DNS entries on your PC. Resetting TCP/IP and flushing the DNS can often resolve these issues. To do this, type Command Prompt in the search bar, right-click it, and select “Run as Administrator.” Then, enter the following commands one by one, pressing Enter after each: netsh int ip reset resets your TCP/IP stack to default. ipconfig /release releases your current IP address. ipconfig /renew requests a new IP address from your router. ipconfig /flushdns clears the DNS cache. After running these commands, restart your computer and reconnect to your Wi-Fi. If outdated DNS entries or IP conflicts were causing the drops, this should fix the problem. Following the steps above will help you identify the root cause of the issue. Once resolved, your Wi-Fi should remain stable, allowing you to work, stream, and browse without interruptions.
https://www.howtogeek.com/fix-constant-wifi-drops/
How to complete Life of a Pharmacist in ARC Raiders
How to Complete Life of a Pharmacist Quest in ARC Raiders
Life of a Pharmacist is one of the later-game quests in ARC Raiders. While the quest itself is straightforward, it can become challenging due to the noisy environment and potentially hostile territory you must navigate to reach the objective. Here’s everything you need to know to complete it successfully.
Quest Overview
To complete Life of a Pharmacist, you need to visit a specific pharmacy located in the Buried City, break in, and then photograph four different locations inside to document the life of the pharmacist.
Locating the Arabusto Pharmacy
The pharmacy in question is the Arabusto Pharmacy, situated in Piazza Arabusto. You can find it near the collapsed highway on the eastern edge of the Buried City map.
Steps to Complete the Quest
- Breach the Pharmacy: Start by breaking through the front door of Arabusto Pharmacy.
- Gather Loot: If you have available inventory space, feel free to collect any valuable loot from the shelves inside.
- Head Upstairs: Make your way to the living quarters located at the back of the store by going upstairs.
- Photograph the Four Key Locations: You will need to document four areas in the living quarters. Luckily, you don’t need to bring a camera—as soon as you interact with each objective, your Raider automatically pulls one out to take a picture.
Details on Photographing the Four Locations
- Pharmacist’s Family: At the top of the stairs, take a picture of the family portraits hanging on the wall to document the pharmacist’s family.
- Pharmacist’s Skill: In the same room, interact with the piano on the western wall to capture the pharmacist’s skill.
- Pharmacist’s Hobbies: Head into the adjacent room and photograph the potted plants sitting atop the shelves to highlight the pharmacist’s hobbies.
- Pharmacist’s Taste: Finally, take the stairs down to the home’s first floor and interact with the table nearby to document the pharmacist’s taste.
Finishing Up
Once you have documented all four locations in the pharmacy, Life of a Pharmacist will be complete. You can then return to Speranza to collect your reward. Note that you do not need to extract from the area to complete the quest.
With these steps, you should be able to efficiently complete the Life of a Pharmacist quest and earn your reward in ARC Raiders.
https://www.shacknews.com/article/146770/how-to-complete-life-of-a-pharmacist-in-arc-raiders
Razer DeathAdder V4 Pro mouse review: Serious bite
Finding a good gaming mouse that balances both performance and comfort can be a challenge. Fortunately, Razer has delivered just that with the Razer DeathAdder V4 Pro. While one might expect a Razer product to be visually dazzling, the DeathAdder V4 Pro opts for a more understated design, focusing on comfort and sheer performance rather than flashy aesthetics.
### Design and Build
The Razer DeathAdder V4 Pro is surprisingly lightweight, weighing in at just 56 grams (1.97 oz.). Inside the box, you’ll find the mouse equipped with Razer’s Optical Mouse Switch Gen-4, along with a True 8000Hz Wired/Wireless Polling dongle and a USB-C-to-A cable. Setup is hassle-free with easy plug-and-play functionality, while optional features can be accessed through Razer’s proprietary Synapse software.
Unlike many other Razer products, this mouse skips the signature RGB lighting. Its simple black design is minimalist—almost to the point of boredom—but that’s intentional. Razer prioritizes function over form with this model, delivering a device that feels exceptional in the hand, especially for those who use a fingertip grip.
### Comfort and Ergonomics
The ergonomic design of the DeathAdder V4 Pro is tailored for long gaming sessions. Its comfortable shape makes it difficult to switch back to other mice, which is a testament to its build quality and thoughtful design. If you spend hours gaming, this mouse is built to keep up without causing discomfort.
### Performance and Features
Performance-wise, the DeathAdder V4 Pro is highly customizable. DPI sensitivity can be toggled on the fly between 400, 800, 1600, 3200, and 6400 DPI with the press of a button. However, the DPI button’s placement near the bottom can be a little awkward, especially since it also doubles as the power button.
Managing the mouse’s polling rate is most efficient through the Razer Synapse software, despite my usual reservations about it. The polling rate can be adjusted from as low as 125Hz up to a blazing 8000Hz. A smart polling rate switcher feature can automatically adjust the DPI when full-screen games are detected, dropping down to 1000Hz when no game is running to conserve battery.
The included dongle uses a three-LED design to easily display connection quality, battery life, and current polling rate, adding to the overall user-friendly experience.
### Real-World Usage
In everyday use, I set the polling rate to the default 1000Hz during casual gaming sessions with titles like *Hearthstone*, *Keeper*, or *Hades 2*. For more demanding shooters such as *Battlefield 6*, *Marvel Rivals*, or classics like *Team Fortress 2*, I crank the polling rate up for maximum precision.
The DeathAdder V4 Pro features two extra side buttons that add versatility, and Synapse allows you to create multiple profiles tailored for different games. Battery life is impressive—lasting several days even at the highest 8000Hz polling rate, and stretching to several weeks with standard use.
One standout feature is that the mouse retains its 8000Hz polling rate even when charging and used in wired mode. This gives it a clear advantage over many competitors, ensuring peak performance at all times.
### Final Thoughts
Aside from its sleek performance, the DeathAdder V4 Pro shines in comfort. The clicks have a hollow yet satisfying sound, and the optical scroll wheel feels responsive, though its long-term durability remains to be seen. The battery life is exceptional, and the dongle’s dome-shaped design makes it easy to use.
While the price point of $169.99 might be steep for some, those willing to invest will likely find it worth every penny.
In conclusion, the Razer DeathAdder V4 Pro is an outstanding gaming mouse that delivers impressive performance and ergonomic comfort, making it a top choice for serious gamers seeking both quality and reliability.
https://www.shacknews.com/article/146749/razer-deathadder-v4-pro-mouse-review-score
How to get and use Wolfpack Grenades in Arc Raiders
Wolfpack Grenades in Arc Raiders: How to Obtain and Use Them Effectively
Wolfpack Grenades in Arc Raiders are a special type of explosive device designed to deal significant damage to ARC enemies. These grenades have become a crucial part of Embark’s survival gameplay, essential not only for defeating enemies but also for defending yourself against their attacks. While traditional explosives such as Gas Grenades remain useful, the Wolfpack Grenades stand out as a unique item from the Epic tier loot category.
This article will guide you on how to obtain and use Wolfpack Grenades effectively in Arc Raiders. Note: Parts of this article reflect the author’s subjective opinion.
How to Get Wolfpack Grenades in Arc Raiders
Wolfpack Grenades can spawn as loot across all available maps in the game. You may find a few inside lockers and containers during raids; however, they do not have fixed spawn locations. Because of this unpredictability, it becomes important to locate the Blueprint to craft these grenades yourself.
To find the Wolfpack Blueprint, focus on Points of Interest (POIs) marked under the Residential category. Thoroughly search containers, drawers, and other interactable objects to increase your chances of finding the Blueprint.
Once you have obtained the Wolfpack Blueprint, the next step is to acquire and upgrade an Explosives Workstation to Level 3. This upgrade unlocks the crafting ability for Wolfpack Grenades, allowing you to produce them by gathering the necessary raw materials.
Materials Needed to Craft Wolfpack Grenades
- 2 Explosive Compounds
- 2 Sensors
The Explosive Compound can be crafted using the Refiner workstation. Sensors, on the other hand, must be scavenged from Topside areas—specifically inside security containers located in POIs with the Technological tag.
Be cautious when searching for Sensors, as these areas carry a small risk due to patrolling ARCs and other Raiders. Always clear the surroundings before breaching any security containers to avoid being caught off guard.
Upgrading the Explosives Workstation may take a considerable amount of time, but it is a worthwhile investment. Having easy access to one of the most effective items against ARCs can greatly improve your chances of survival.
How to Use Wolfpack Grenades in Arc Raiders
Using Wolfpack Grenades is straightforward and similar to other explosives in the game. The grenade has an impressive 100-meter radius and is most effective when thrown directly at ARC enemies.
After crafting the grenade, place it in your backpack or assign it to a Quick Use slot for easy access during combat. Properly aim the grenade’s trajectory before throwing to maximize its impact.
Once deployed, the grenade explodes into several smaller missiles that independently target ARCs in different locations within the blast radius. However, keep in mind that it is risky to use Wolfpack Grenades against agile enemies like Leaper ARCs. It is best to deploy the grenade only when such enemies are stationary.
Stay Updated
For more tips, guides, and news about Arc Raiders, be sure to follow Sportskeeda and stay tuned for the latest updates.
Related Guides and Articles:
- ARC Raiders review: An extraction shooter with purpose, and probably the best one
- Advanced Mechanical Components locations in Arc Raiders (Where to find)
- How to complete the Medical Merchandise quest in Arc Raiders
- How to find Laboratory Reagents in ARC Raiders
Are you stuck on today’s Wordle? Our Wordle Solver will help you find the answer.
https://www.sportskeeda.com/esports/how-get-use-wolfpack-grenades-arc-raiders
Here’s How Obamacare Really Works, and It’s Disgusting
**It’s Been Over 15 Years Since Democrats Passed Obamacare — And the Promises Have Failed Miserably**
*By Matt Margolis | PJ Media | November 9, 2025*
It’s been more than 15 years since Democrats passed the Affordable Care Act, commonly known as Obamacare, under the promise that it would make healthcare more affordable for Americans. The public was assured that they would save money, keep their doctors, and finally benefit from a healthcare system that worked for them — not for big insurance companies.
Today, those promises look like a bad joke.
A recent post shared by our sister site Twitchy highlights the reality behind the Obamacare debacle and why it doesn’t actually serve the interests of everyday people. Instead, the system was built to enrich the healthcare industry — and the numbers prove it.
### How Obamacare Really Works
Here’s a rundown of how the system functions, if you can stomach learning how the sausage is made:
Each year, the federal government quietly funnels around $40 billion directly to insurance companies through cost-sharing reduction subsidies. These payments are disbursed automatically — there’s no congressional vote, no annual debate, and no accountability. The money just flows.
Meanwhile, everyday Americans continue to face sky-high deductibles and co-pays, often high enough to make anyone think twice before visiting a doctor. The supposed “affordability” of Obamacare is largely an illusion built on taxpayer-funded handouts that prop up corporate profits.
### Who Really Benefits?
Nonprofit hospitals, those institutions commonly waving the banner of community service, aren’t exactly struggling, either. They collect more than $125 billion each year in tax breaks due to their “nonprofit” status. This means they avoid paying property, income, and sales taxes — all while continuing to generate significant revenue from every direction.
Moreover, Medicare alone overpays these hospitals by roughly $28 billion annually. Hospitals also charge between 60% to 80% more than independent doctors for the exact same procedures.
### The Bottom Line
Instead of making healthcare affordable and accessible, Obamacare has largely become a means to enrich insurance companies and hospitals — leaving everyday Americans to shoulder the burden of high costs and limited access.
—
*Comments from readers on Free Republic:*
– **Rummyfan:** “They’re ALL traitors. Except maybe the kid.”
– **SaveFerris:** *(Luke 17:28)* “As it was in the days of Lot; they did eat, they drank, they bought, they sold…”
– **Crusty old prospector:** “Long past time they abolish the ACA.”
– **Round Earther:** 😀😃😄🤣🤣🤣🤣😛😜😝
*Disclaimer: Opinions posted on Free Republic are those of the individual posters and do not necessarily represent the opinion of Free Republic or its management. All materials posted herein are protected by copyright.*
https://freerepublic.com/focus/f-news/4351710/posts
He Let Ohio Pay Taxes in BTC, Now He’s Lost $1.2 Million Trading
Former Ohio State Treasurer Josh Mandel, once hailed as an early political champion of Bitcoin, has revealed a personal loss of more than $1.2 million on call options tied to BlackRock’s iShares Bitcoin Trust (IBIT). The former state official’s gamble followed his bold prediction that Bitcoin would reach $444,000 by November 8—a forecast that has clearly not materialized.
Mandel shared details of his failed trade in a post on X (formerly Twitter), saying he had gone “all in” on IBIT call options, only to watch them expire worthless.
“Earlier in the cycle, I published a MSTR and MSTR-option-only portfolio. Initially, it was entirely long, then shifted to short with in-the-money covered call sales as I predicted Bitcoin would hit $84,000. These moves worked out well enough, but I grew impatient with my final call for $444,000, and as they say, you’re only as good as your last call,” he wrote.
Mandel added that his post was intended “to be transparent,” rejecting accusations that he misled investors or sought to profit through coin issuance.
### A Crypto Pioneer in Ohio’s Government
Long before retail Bitcoin speculation reached mainstream America, Josh Mandel helped Ohio “plant a flag” for crypto adoption. In November 2018, while serving as State Treasurer, he launched OhioCrypto.com—the first U.S. government platform allowing businesses to pay state taxes in Bitcoin.
The payments, processed through BitPay, were automatically converted into U.S. dollars for the state treasury. At the time, Mandel described Bitcoin as “a legitimate form of currency” and positioned Ohio as a leader in blockchain innovation.
“We’re looking to plant a flag for Ohio,” he told reporters, arguing that the move would modernize state finances and attract tech-forward businesses.
However, the program faced regulatory hurdles under his successor, Treasurer Robert Sprague, who suspended it in 2019 after determining that BitPay’s payment structure may have violated state procurement laws. Fewer than ten companies had used the service before it was shut down.
### Risks and Lessons From the Bitcoin ETF Options Market
Mandel’s high-stakes loss comes as interest in Bitcoin ETF options has surged since their launch in late 2024. According to Kaiko research, trading volumes in Bitcoin ETF options soared, with many traders favoring bullish positions.
Recently, however, Bitcoin ETFs have not been performing well, with outflows reaching levels last seen in May. They only recently recorded the first inflow after a $2.9 billion outflow streak.
Speculative long-term bets like Mandel’s remain outliers, highlighting the significant risks associated with options and the volatility of Bitcoin prices.
By making his investment loss public, Mandel offers a reminder that experienced public figures and crypto pioneers can also misjudge timing or risk in digital assets.
As regulated crypto derivatives expand and attract more investors, Mandel’s experience demonstrates that market predictions, even when widely shared, come with no guarantee of success.
https://bitcoinethereumnews.com/bitcoin/he-let-ohio-pay-taxes-in-btc-now-hes-lost-1-2-million-trading/
What your photos are secretly telling everyone (and how to fix it)
Every photo you take is secretly telling a story you might not want to share. Buried inside the image file is hidden metadata that can reveal exactly when and where you took it, what camera or phone you used, and even your camera settings. Unfortunately, this information can be misused by anyone online to find your home address or track your movements. This “secret” data is stored within the EXIF metadata.
While EXIF data can be useful for sorting and finding your photos, it can also become a privacy nightmare. Here’s what you need to know about EXIF—and, more importantly, how to fix the issue.
—
## Why You Should Remove Metadata From Your Photos
Any digital camera or mobile phone you use to take a photo automatically captures and embeds a bunch of details into the image file. This information, called metadata—specifically EXIF (Exchangeable Image File Format)—includes camera settings like shutter speed, aperture, ISO speed, white balance, as well as image dimensions, resolution, color space, GPS location, and the date and time of capture.
While this information is useful for photographers and anyone interested in learning more about a photo, posting images online with embedded metadata can pose privacy and security risks. For example, the GPS coordinates in a picture of your backyard could be exploited by someone to identify your home address and potentially doxx you.
By stripping metadata from your photos, you remove all EXIF information and can share pictures online without worrying about exposing sensitive details.
—
## How to Remove Metadata From Your Photos
There are various tools available to remove metadata, but choosing the right one ensures the best results for your device and needs.
### Use ExifCleaner if You’re on Windows
ExifCleaner is a popular, free tool for removing metadata from images on Windows. It supports all major image formats such as JPG, PNG, GIF, and TIFF, and its standout feature is batch processing, allowing you to remove metadata from multiple images at once.
ExifCleaner also works with videos (MOV, MP4, M4A) and PDF documents.
**How to Use ExifCleaner:**
1. Download ExifCleaner from its official website and install it on your PC.
2. Launch the app. Use *File > Open* or drag and drop images into the window.
3. Add multiple images for batch processing if desired.
4. ExifCleaner will strip the metadata and display the before-and-after details in a table.
5. Hover over the “Exif Before” number to view the original embedded details.
**Important:** ExifCleaner overwrites the original images, so back up your photos if you want to retain the metadata.
**Alternative native method on Windows:**
– Open File Explorer and navigate to your image.
– Right-click the file, select **Properties**, and go to the **Details** tab.
– Click **Remove Properties and Personal Information**.
– Choose to create a copy with all possible properties removed or selectively remove them from the original.
—
### ImageOptim Is the Best Option on a Mac
While you can use ExifCleaner on Mac, ImageOptim offers a superior experience with a cleaner interface and support for more file formats. It allows selective metadata removal, so you can keep useful info while stripping sensitive details.
ImageOptim also optimizes images to reduce file size without sacrificing quality, and lets you adjust compression settings.
**How to Use ImageOptim:**
1. Download and install ImageOptim from its website.
2. Launch the app, then click **Files > Add Files** to import images, or simply drag and drop them.
3. ImageOptim will automatically remove metadata and optimize the images.
4. View file size reduction in the **Savings** column.
5. To undo changes, select the image, then choose **File > Revert to Original**.
You can customize preferences and toggle supported file formats through the *Tools* menu.
**Note:** macOS does not have a native tool for removing all image metadata, but you can remove location data easily in Preview or the Photos app.
**To remove location data in Preview:**
– Open the image in Preview.
– Click the **i** (info) button on the toolbar.
– Go to the **GPS** tab and click **Remove Location Info**.
**To remove location data in Photos:**
– Open the photo.
– Click **Image > Location > Hide Location**.
—
### Android Users Can Use Photo Exif Editor
Most Android gallery or file manager apps show image metadata but don’t allow removal. For this, try the free **Photo Exif Editor** app.
It offers detailed metadata viewing and lets you selectively remove tags, such as location data, while preserving other information.
**How to use Photo Exif Editor:**
1. Download and install from the Google Play Store.
2. Open the app and grant access to your photos.
3. Tap **Photos** and select the image.
4. Tap the eye icon to view metadata.
5. Tap the EXIF icon in the top-right corner.
6. Check **Select the Tags You Want to Remove** or mark individual tags.
7. Tap the save icon and allow permission to overwrite the image or create a copy with metadata removed.
**Note:** There is no native Android method to remove metadata from photos.
—
### On an iPhone? Exif Metadata Has You Covered
The iPhone App Store has few third-party apps for metadata removal, but **Exif Metadata** is a reliable, free option. It lets you quickly view, edit, and remove metadata, and includes an extension for in-app viewing within the Photos app.
**How to use Exif Metadata:**
1. Download and install Exif Metadata from the App Store.
2. Open the app and grant Photos access.
3. Tap the **+** button and select an image.
4. View the metadata and tap **Remove All Metadata** or **Remove EXIF** to clear specific info.
5. The app will ask if you want to delete the original photo; confirm or save a copy.
You can also edit metadata manually by choosing **Edit EXIF**, modifying values, and saving.
If you only want to remove location data, the iPhone’s built-in Photos app can do this:
– Open a photo.
– Tap the **i** button.
– Tap **Adjust** next to the location.
– Select **No Location** to clear GPS data.
—
## Final Thoughts
Clearing metadata from your photos is a smart privacy step before sharing on social media or online. However, you don’t always have to remove all metadata entirely.
A good approach is to selectively remove sensitive details like GPS coordinates or personal identifiers while keeping useful information intact.
Choose the method and tool best suited to your device and your needs to strike the perfect balance between privacy and functionality.
https://www.howtogeek.com/what-your-photos-are-secretly-telling-everyone/
21Shares Files Amendment for First U.S. Spot XRP ETF, 20-Day Countdown Begins
**21RP ETF: 20-Day Countdown Begins**
The world’s first and largest crypto Exchange-Traded Product (ETP) issuer, 21Shares, has made a significant move in the U.S. market. If the U.S. Securities and Exchange Commission (SEC) does not intervene within the next 20 days, the 21RP ETF could receive automatic approval by November 27, 2025.
**21RP ETF Clock Ticking**
On November 7, 2025, 21Shares filed Amendment No. 3 to its S-1 registration form with the SEC. This filing initiates a 20-day review period during which the SEC can either respond or allow the ETF to go live automatically on November 27. Bloomberg’s senior ETF analyst, Eric Balchunas, highlighted that if the SEC remains silent, it would mark a notable breakthrough for 21RP, which has long struggled to gain regulatory recognition in the U.S.
**Other Firms Join the XRP ETF Race**
This move comes amid heightened activity in the altcoin ETF space. Just prior to 21Shares’ filing, institutional giants such as Franklin Templeton, Grayscale, and Bitwise submitted similar amendments to their own ETF applications. Each of these filings triggers a new short approval countdown, signaling a growing wave of optimism for altcoin ETFs.
**WisdomTree Files for CoinDesk 20 ETF**
Adding to the momentum, WisdomTree has filed for a Physical CoinDesk 20 Spot ETF. This diversified fund will track the top 20 cryptocurrencies by market capitalization, offering investors exposure to a broad basket that includes Bitcoin (31.02%), XRP (19.60%), Ethereum, Cardano, Solana, and others.
**From Legal Victory to Wall Street Momentum**
Ripple’s 2023 legal victory against the SEC has significantly boosted institutional interest in XRP. Analysts like Nate Geraci view this as the start of a new era where altcoins can finally compete on Wall Street without regulatory concerns.
That said, uncertainty remains. The SEC could still intervene, delay, or deny the approval. However, if it does not, the 21RP ETF could make history as one of the first altcoin ETFs approved in the U.S.
Meanwhile, XRP’s price has seen a 4% increase, trading at around $2.32, with a market capitalization of approximately $139.19 billion.
https://bitcoinethereumnews.com/tech/21shares-files-amendment-for-first-u-s-spot-xrp-etf-20-day-countdown-begins/